Wireless Remote Control Transmitter/Receiver Set
|
|
|
Industrial Long Distance Wireless Remote Control Transmitter/Receiver Set
SERIES: WXL
|
|
Features
Wireless Bridge Between Switches & Relays
Supervisory "Low Power" & "RF Loss" Alarms
Activate Transmitter with Any Dry-contact Switch
Models Available With 1, 2 or 4 Control Lines
Up To 6 Mile Line-of-site Distance
Receiver Provides SPDT Mechanical Relays
Transmitter Powered by Battery or DC Supply
NEMA 4, 4X PCT Blended Plastic Enclosures
Pre-configured, Ready-To-Operate
Sold As Transmitter/Receiver Matched Set
License Free Radio Operation
|
Applications
Tank Level Monitoring, Pump or Motor Control,
Valve Activation,
Gate or Lighting Control
Description
The WXL transmitters and receivers are designed
for use in various wireless remote-control applications. When triggered
with an external dry-contact switch, the switch transmitter will send a
digital encoded, FSK modulated signal to its companion control receiver.
The receiver will verify the digital code and then activate its relay output.
Each system is sold as a factory programmed matched set.
That means there is no field settings needed to operate right out of the box.
Power for the transmitter or receiver can come from any external 12 VDC power supply or battery.
An internal fuse protects each unit from a reverse power connection.
NOTE: UNITS ARE FACTORY PROGRAMED AS A SINGLE MATCHED SET. IF YOU WANT TO USE ONE TRANSMITTER TO CONTROL MORE THAN ONE RECEIVER, OR MORE THAN ONE TRANSMITTER TO CONTROL A SINGLE RECEIVER, PLEASE CONTACT US PRIOR TO PURCHASING SO WE CAN CUSTOMIZE A GROUP OF UNITS FOR YOU SPECIFIC TO YOUR APPLICATION. THERE IS NO EXTRA CHARGE FOR THIS SERVICEE.
|
|
The WXL Series Switch Transmitter features up to 4
dry-contact inputs that activate relays of the receiver unit.
The unit also sends supervisory system data to the receiver
The WXL Series Receiver features up to 4 control
relays. The unit also provides an Alarm output
for Transmitter low power or RF signal loss.
|
2.4 GHz General Specifications
|
|
Radio Frequency:
|
2.4 GHz
|
|
Regulatory:
|
FCC Part 15 (No license required)
|
|
Control Lines:
|
1, 2 or 4
|
|
Transmitter/Receiver Code Matching:
|
Factory set
|
|
Antenna Connection:
|
RP-SMA
|
|
Wiring Connection:
|
Terminal Blocks
|
Transmit/Receive Distance
(with included antennas):
|
Line-of-site 600ft Max
|
Transmit/Receive Distance
(with optional antennas):
|
Line-of-site 1 Mile
|
|
Operating Temperature:
|
-22 to 130 ºF (-30 to 54 ºC)
|
|
Enclosures:
|
NEMA 4, 4X, PCT Blended Plastic
|
|
Antennas:
|
5dbi, Omni-directional (Included)
|
|
2.4 GHz Transmitter Specifications
|
|
Control Input Type:
|
Switch (Dry-contact)
|
|
RF Power Output:
|
63mW
|
|
RF Data Rate:
|
250 kbps
|
|
RF Output Impedance:
|
50 Ohm nominal
|
|
Operating Power:
|
11-14 VDC @ 2W max
|
|
2.4 GHz Receiver Specifications
|
|
Receive Sensitivity:
|
-100 dBm
|
|
RF Input Impedance:
|
50 Ohm nominal
|
|
Operating Power:
|
11-14 VDC @ 3W max
|
|
Control Output:
|
Relays, 3A, 250V, SPDT
|
|
|
900 MHz General Specifications
|
|
Radio Frequency:
|
900 MHz
|
|
Regulatory:
|
FCC Part 15 (No license required)
|
|
Control Lines:
|
1, 2 or 4
|
|
Transmitter/Receiver Code Matching:
|
Factory set
|
|
Antenna Connection:
|
RP-SMA
|
|
Wiring Connection:
|
Terminal Blocks
|
Transmit/Receive Distance
(with included antennas):
|
Line-of-site 3 Miles
|
Transmit/Receive Distance
(with optional antennas):
|
Line-of-site 6 Miles
|
|
Operating Temperature:
|
-22 to 130 ºF (-30 to 54 ºC)
|
|
Enclosures:
|
NEMA 4, 4X PCT Blended Plastic
|
|
Antennas:
|
7dbi, Omni-directional (Included)
|
|
900 MHz Transmitter Specifications
|
|
Control Input Type:
|
Switch (Dry-contact)
|
|
RF Power Output:
|
100mW
|
|
RF Data Rate:
|
10 kbps
|
|
RF Output Impedance:
|
50 Ohm nominal
|
|
Operating Power:
|
11-14 VDC @ 2W max
|
|
900 Mhz Receiver Specifications
|
|
Receive Sensitivity:
|
-106 dBm
|
|
RF Input Impedance:
|
50 Ohm nominal
|
|
Operating Power:
|
11-14 VDC @ 3W max
|
|
Control Output:
|
Relays, 3A, 250V, SPDT
|
|
Regulatory Approvals
|
|
Regulatory:
|
FCC Part 15 (No license required)
|
|
FCC(USA): 2.4 GHz
|
MCQ-XBEEXSC
|
|
IC (Canada): 2.4 GHz
|
1846A-XBEEXSC
|
|
FCC(USA): 900 MHz
|
MCQ-XBEEXSC
|
|
IC (Canada): 900 MHz
|
1846A-XBEEXSC
|
|
Available Models
|
|
Model Number
|
Description
|
Control Lines
|
|
WXL-24-1
|
2.4 GHz Industrial 1-Line Wireless Remote Control Transmitter/Receiver Set
|
1
|
|
WXL-24-2
|
2.4 GHz Industrial 2-Line Wireless Remote Control Transmitter/Receiver Set
|
2
|
|
WXL-24-4
|
2.4 GHz Industrial 4-Line Wireless Remote Control Transmitter/Receiver Set
|
4
|
|
WXL-900-1
|
900 Mhz Industrial 1-Line Wireless Remote Control Transmitter/Receiver Set
|
1
|
|
WXL-900-2
|
900 Mhz Industrial 2-Line Wireless Remote Control Transmitter/Receiver Set
|
2
|
|
WXL-900-4
|
900 Mhz Industrial 4-Line Wireless Remote Control Transmitter/Receiver Set
|
4
|
|
Each Wireless Transmitter/Receiver Set includes Omni Antennas, 9' Antenna Extension Cables, Antenna Mounting Brackets and User Manual.
Note: Continued product improvements make specifications subject to change without notice.
|
|
This product is approved for use in USA.
|
